Spiral Ferrule Assemblies*
(with Ductile wedge)
Easy to install in shop or field.
Quick change eliminates down time.
Available in standard sizes.
Colour denotes size for ease of ordering.
|
Spiral Ferrule Assemblies*
(with Bronze wedge)
These quality cast steel ferrules are manufactured in our Surrey, BC plant.
They are Canadian made and undergo all industry testing procedures.
|
Spiral Wedge Components*
(Ductile)
Replacement wedges.
Ferrules can be re-used, but wedges should be replaced when distorted.
L.H. wedges available for #7 and #8.
Available in assorted sizes.
|
Spiral Wedge Components*
(Bronze)
Replacement wedges.
Ferrules can be re-used, but wedges should be replaced when distorted.
Available in assorted sizes.
|
|
Ferrule Component*
The outside replacement ferrule to be used with the assorted style wedges.
|
Press-On Ferrule*
These ferrules are machine pressed on to the cable.
Available in assorted sizes.
|
Choker Hooks
ROLOG Choker hooks are manufactured in low alloy steel.
Their toughness and durability develop cable strength to the fullest, giving a lifetime of trouble-free service under all conditions.
|
Strawline Hooks
(Arrow Type)
ROLOG Strawline hooks are made of a special high tensile alloy steel and are used to grab lines for log retrieval.
|
Strawline Hooks
(Square Type)
ROLOG Strawline hooks are made of a special high tensile alloy steel and are used to grab lines for log retrieval.
|
Midget Holdtight Hooks
(Ring Type)
ROLOG Holdtight hooks are made of a special high tensile alloy steel and are used to attach individual choker lines to the main line.
|
Midget Holdtight Hooks
(Sleeve Type)
ROLOG Holdtight hooks are made of a special high tensile alloy steel and are used to attach individual choker lines to the main line.
|
Skidder Rings
ROLOG Skidder rings are manufactured in a special high tensile alloy steel.
These mainline rings feature a wide bale to decrease cable chafing.
|
Rafting Dogs
ROLOG Rafting dogs are used to connect logs or booms to a line.
Available in 5/8" or 1/2".
|
Twitch Hook
ROLOG Twitch hooks are made of a special high tensile alloy steel and are used to attach individual choker lines to the main line. |
Swifter Hook
ROLOG Swifter hooks are made of a special high tensile alloy steel and are used to assemble log booms.
Comes with wedge and slider end.(Can be ordered separately)
|
Log Stamp Marking Hammers
Available in Regular, 5lbs or Light Weight, 3lbs.
Wood handle or non-slip handles are available.
"RE-MARK"ABLE Log Hammers available.
|
Cast Chain
ROLOG Cast Chains are made of
special high tensile alloy steel.
|
|
Reach Clamp Assembly
(Logging Truck Trailer Draw Bar)
ROLOG Reach clamp assemblies are logging truck trailer draw bars.
They can be purchased in complete assemblies or the replacement handles can be purchased.
|
* Cautionary Note:
Wedge-type Ferrules are intended
only for use with new 6x19 or 6x37 Class,
right regular lay EIP or IWRC wire rope.
|
ONE TEST IS WORTH
A THOUSAND EXPERT OPINIONS
1 ¼" 6 X 36
E.E.I.P.S.
IWRC R.L.T.L. c/w Steel
High Strain Flemish
Eye on One End and Steel
Ferrule on Other End
The rope broke at 153,358 Lbs.
Test results show up to 91% rope strength.
|
INSTALLATION INSTRUCTIONS
Step 1: Insert the cable through the ferrule.
Step 2: Spread the strands and lay them in individual grooves in the wedge.
Step 3: Tap the wedge and cable down to approximately 3/8" from the top.
The first load will seat the cable and
the wedge securely in the ferrule. |
